3M™ Face Mask Spray Paint Respirator 6502QL is our reusable half-mask respirator with twin inhalation valves, large filters, bayonet filter fixing system, and quick latch design for extra convenience. It can be used with particulate filters, gas and vapour cartridges, or combination cartridges, which can be replaced with new filters when needed. Economical, lightweight, easy to maintain and handle, it’s suitable for trade painting and sanding tasks.

• Reusable Face Mask Respirator for spray painting, brush and roller painting, orbital and manual sanding.
• A2 protection against organic gases and vapours such as solvent-based paint, adhesive and cleaning detergents*.
• P3 protection against high-level fine dusts and oil or water-based mists*.
• Quick latch mechanism provides easy, one-hand drop-down of facepiece without removing head straps. Convenient for moving in and .out of contaminated areas and during break times or conversation.
• Enhanced breathability and reduced resistance provided by twin inhalation valves and large filters, compared to single filter masks
• Economical, easy maintenance, simple to handle and lightweight.
• Easy filter change with bayonet filter fixing system for a wide range of filters.
• Reusable: can be used with particulate filters, gas and vapour cartridges or combination cartridges and be replaced with new filter when needed.
• Tested and approved to comply with European standards - CE Mark 0086 (6052QL Mask EN 140:1998) (6055 Filters EN 14387:2004+A1:2008 A2) (5935 Filters EN 143:2000 P3 R).
• Users must be trained and have read all user instructions. Misuse may cause injury, severe or life-threatening illness.
• Pack contents: 1 respirator and 1 pair of filters.
• Users must be trained and have read all user instructions. Misuse may cause injury, severe or life-threatening illness.
• *This product helps protect against certain organic gases and vapours (bp > 65 °C) in concentrations up to 10 x WEL or 5000 ppm (whichever is the lower) and particles in concentrations up to 20 x WEL.
• Compatible with 3M Eyewear and Hearing Protection.

For lightweight, enhanced breathability and comfort when professionally spray painting, brush and roller painting, or orbital and manual sanding, use 3M™ Spray Paint Respirator 6502QL. Featuring a quick latch mechanism making it easy to drop down the respirator from your face without removing head straps. Twin inhalation valves with large filters that reduce breathing resistance compared to single filter masks, our reusable half-masks make moving in and out of contaminated areas easy, and working for extended periods more comfortable. Engineered to provide A2 and P3 Protection against organic gases and vapours, high-level fine dusts and oil or water-based mists, they can be used with particulate filters, gas and vapour cartridges or combination cartridges, and the bayonet filter fixing system enables replacement filters to simply click into place. Economical, easy to maintain, simple to handle and lightweight, they’re tested and approved to comply with European standards, and compatible with 3M Eyewear and Hearing Protection.

Suggested Applications - Spray painting, brush and roller painting, orbital sanding, and manual sanding